Recent Posts

Pages: [1] 2 3 4 ... 10
1
NicTool / Re: Let's Encrypt support
« Last post by matt on April 24, 2018, 10:43:56 am »
Absolutely, this is towards the top of the list of features I'd like to see.
2
NicTool / Let's Encrypt support
« Last post by jyri on April 24, 2018, 09:17:25 am »
Hi,

Are there any plans on supporting the wildcard cert generation as it needs the DNS-01 challenge?
3
NicTool / Trouble with Import
« Last post by jlucas on November 19, 2017, 03:14:01 pm »
At first I thought I was getting the error because the NS servers I had added to nictool were not the same as the ones that are listed in the hosts file so I updated that to match but I'm still running into the same error listed below.  I've included the conf file and the hosts file.  I suspect it's way the host file is set up from the software we're moving away from because it's a bit different from the bind files created from nictool from the test zones I've exported.  Any ideas?

../server/bin/nt_import.pl --host 172.16.4.53 --user jackson.lucas --pass ****** --type bind --file /root/Zones/confs/222.227.204.in-addr.arpa.conf
loading type: bind

Starting import using: /root/Zones/confs/222.227.204.in-addr.arpa.conf
zone: 222.227.204.IN-ADDR.ARPA  from    /root/Zones/222.227.204.IN-ADDR.ARPA-hosts
zr_soa
zid: 23
zr_ns
NS : 222.227.204.IN-ADDR.ARPA   central.wyoming.com.
Required parameters missing ( name ) at /usr/local/share/perl/5.20.2/NicToolServer/Import/Base.pm line 166, <GEN1> line 13.

222.227.204.in-addr.arpa.conf
zone "222.227.204.IN-ADDR.ARPA" IN {
        type master;
        file "/root/Zones/222.227.204.IN-ADDR.ARPA-hosts";
};

222.227.204.IN-ADDR.ARPA-hosts
$TTL 3600
;
;
;   Cody point - to - point - > Arial
;
;   /var/named/db.204.227.222
;
;   Origin: 222.227.204.IN-ADDR.ARPA
;
@               IN      SOA     CENTRAL.WYOMING.COM.    NS2.WYOMING.COM.        NS3.WYOMING.COM.        2012061201      86400   900     604800  3600    ; minimum [1h]
;
@               IN      NS      CENTRAL.WYOMING.COM.
@               IN      NS      NS2.WYOMING.COM.
@               IN      NS      NS3.WYOMING.COM.
;
1               IN      PTR     S8001-E0.WYOMING.NET.
2               IN      PTR     S8002-E0.WYOMING.NET.
3               IN      PTR     S8003-E0.WYOMING.NET.
4               IN      PTR     S8004-E0.WYOMING.NET.
5               IN      PTR     S8005-E0.WYOMING.NET.
6               IN      PTR     S8006-E0.WYOMING.NET.
7               IN      PTR     S8007-E0.WYOMING.NET.
8               IN      PTR     S8008-E0.WYOMING.NET.
9               IN      PTR     S8009-E0.WYOMING.NET.
10              IN      PTR     S80010-E0.WYOMING.NET.
11              IN      PTR     S80011-E0.WYOMING.NET.
12              IN      PTR     S80012-E0.WYOMING.NET.
;
; Compaq 4000 56k modems
;
13              IN      PTR     S800-ISP-1.WYOMING.NET.
14              IN      PTR     S800-ISP-2.WYOMING.NET.
15              IN      PTR     S800-ISP-3.WYOMING.NET.
16              IN      PTR     S800-ISP-4.WYOMING.NET.
;
; Dialup modems
;
;
; MMP pool
;
209             IN      PTR     S800-MMP-1.WYOMING.COM.
210             IN      PTR     S800-MMP-2.WYOMING.COM.
211             IN      PTR     S800-MMP-3.WYOMING.COM.
212             IN      PTR     S800-MMP-4.WYOMING.COM.
213             IN      PTR     S800-MMP-5.WYOMING.COM.
214             IN      PTR     S800-MMP-6.WYOMING.COM.
215             IN      PTR     S800-MMP-7.WYOMING.COM.
216             IN      PTR     S800-MMP-8.WYOMING.COM.
217             IN      PTR     S800-MMP-9.WYOMING.COM.
218             IN      PTR     S800-MMP-10.WYOMING.COM.
219             IN      PTR     S800-MMP-11.WYOMING.COM.
220             IN      PTR     S800-MMP-12.WYOMING.COM.
221             IN      PTR     S800-MMP-13.WYOMING.COM.
222             IN      PTR     S800-MMP-14.WYOMING.COM.
223             IN      PTR     S800-MMP-15.WYOMING.COM.
224             IN      PTR     S800-MMP-16.WYOMING.COM.
;
; Dialup static
;
225             IN      PTR     S800-STA-1.WYOMING.COM.
226             IN      PTR     S800-STA-2.WYOMING.COM.
227             IN      PTR     S800-STA-3.WYOMING.COM.
228             IN      PTR     S800-STA-4.WYOMING.COM.
229             IN      PTR     S800-STA-5.WYOMING.COM.
230             IN      PTR     S800-STA-6.WYOMING.COM.
231             IN      PTR     S800-STA-7.WYOMING.COM.
232             IN      PTR     S800-STA-8.WYOMING.COM.
233             IN      PTR     S800-STA-9.WYOMING.COM.
234             IN      PTR     S800-STA-10.WYOMING.COM.
235             IN      PTR     S800-STA-11.WYOMING.COM.
236             IN      PTR     S800-STA-12.WYOMING.COM.
237             IN      PTR     S800-STA-13.WYOMING.COM.
238             IN      PTR     S800-STA-14.WYOMING.COM.
239             IN      PTR     S800-STA-15.WYOMING.COM.
240             IN      PTR     S800-STA-16.WYOMING.COM.
;
; Ethernet
;
241             IN      PTR     S800-ETH-1.WYOMING.COM.
242             IN      PTR     S800-ETH-2.WYOMING.COM.
243             IN      PTR     S800-ETH-3.WYOMING.COM.
244             IN      PTR     S800-ETH-4.WYOMING.COM.
245             IN      PTR     S800-ETH-5.WYOMING.COM.
246             IN      PTR     S800-ETH-6.WYOMING.COM.
247             IN      PTR     S800-ETH-7.WYOMING.COM.
248             IN      PTR     S800-ETH-8.WYOMING.COM.
249             IN      PTR     S800-ETH-9.WYOMING.COM.
250             IN      PTR     S800-ETH-10.WYOMING.COM.
251             IN      PTR     S800-ETH-11.WYOMING.COM.
252             IN      PTR     S800-ETH-12.WYOMING.COM.
253             IN      PTR     S800-ETH-13.WYOMING.COM.
254             IN      PTR     S800-ETH-14.WYOMING.COM.
4
NicTool / Re: Undefined subroutine
« Last post by jlucas on November 14, 2017, 02:12:10 pm »
I spun up another VM and tried this in Debian 9 and 8 and it appears to be working without issues in 8 so I'm going to go ahead with that.  Thanks for the help.
5
NicTool / Re: Undefined subroutine
« Last post by jlucas on November 13, 2017, 09:46:11 am »
It is in installed

Loaded plugins: fastestmirror
base                                                                                                         | 3.6 kB  00:00:00
epel/x86_64/metalink                                                                                         |  17 kB  00:00:00
epel                                                                                                         | 4.7 kB  00:00:00
extras                                                                                                       | 3.4 kB  00:00:00
puppet5                                                                                                      | 2.5 kB  00:00:00
updates                                                                                                      | 3.4 kB  00:00:00
(1/2): epel/x86_64/updateinfo                                                                                | 847 kB  00:00:00
(2/2): epel/x86_64/primary_db                                                                                | 6.1 MB  00:00:01
Loading mirror speeds from cached hostfile
 * base: mirrordenver.fdcservers.net
 * epel: mirror.solarvps.com
 * extras: distro.ibiblio.org
 * updates: mirror.web-ster.com
Package perl-CGI-3.63-4.el7.noarch already installed and latest version
Nothing to do

I removed it and that broke apache, which was to be expected.

[Mon Nov 13 09:39:54.789045 2017] [perl:error] [pid 22659] Can't locate CGI.pm in @INC (@INC contains: /usr/local/lib64/perl5 /usr/local/share/perl5 /usr/lib64/perl5/vendor_perl /usr/share/perl5/vendor_perl /usr/lib64/perl5 /usr/share/perl5 . /etc/httpd) at /usr/local/nictool/client/lib/nictoolclient.conf line 21.\nBEGIN failed--compilation aborted at /usr/local/nictool/client/lib/nictoolclient.conf line 21.\nCompilation failed in require at (eval 2) line 1.\n

I reinstalled it and am getting the same error when I try to add a group or zone.
6
NicTool / Re: Undefined subroutine
« Last post by matt on November 10, 2017, 11:21:05 pm »
Is the CGI module installed? If yes, try updating it. If not, try installing it.
7
NicTool / Undefined subroutine
« Last post by jlucas on November 10, 2017, 02:00:40 pm »
Whenever I try and add a zone or group I'm getting a an error page. 

Internal Server Error
The server encountered an internal error or misconfiguration and was unable to complete your request.
Please contact the server administrator at root@localhost to inform them of the time this error occurred, and the actions you performed just before this error.
More information about this error may be available in the server error log.

When I check the apache logs I'm finding.

[Fri Nov 10 13:37:17.076851 2017] [:error] [pid 6582] Undefined subroutine CGI::multi_param\n at /usr/local/nictool/client/htdocs/group_zones.cgi line 599.\n
[Fri Nov 10 13:44:01.141220 2017] [:error] [pid 6569] Undefined subroutine CGI::multi_param\n at /usr/local/nictool/client/htdocs/group.cgi line 117.\n

I've done some grepping around the scripts in the client folder and I'm not seeing it defined anywhere.  I suspect that I'm possibly missing a perl module, or more likely I'm grasping at straws, but when I run perl Makefile.PL in the server and client it's not seeing anything missing.  I've restarted the httpd processing thinking that maybe something didn't get loaded properly but that didn't help.

I was able to add a new nameserver and user without an issue.  Any help would be appreciated.
8
NicTool / Re: SOAP: transport error:
« Last post by jlucas on November 08, 2017, 10:17:22 am »
Sure enough, I thought I had already worked that out but apparently not.  Thanks.
9
NicTool / Re: SOAP: transport error:
« Last post by matt on November 07, 2017, 04:00:12 pm »
Try disabling SELinux as that's a frequent stumbling point. If that works, turn it back on and then figure out the incantations required to get port 8082 open.
10
NicTool / SOAP: transport error:
« Last post by jlucas on November 07, 2017, 03:48:21 pm »
I'm getting the following error after install on CentOS 7 and NicTool 2.34.

SOAP: transport error: http://172.17.140.25:8082/soap: 500 Can't connect to 172.17.140.25:8082

As best I can tell everything should be set up properly.  I've also ensured that the ports are allowed through the firewall.  Any thoughts?

# cat /etc/httpd/conf.d/z_nictool.conf
PerlRequire /usr/local/nictool/client/lib/nictoolclient.conf
ServerName nictool.ops.wyoming.com
<VirtualHost 172.17.140.25:80>
    # force a https connection
    ServerName nictool.ops.wyoming.com
    Redirect / https://nictool.ops.wyoming.com/
</VirtualHost>

Listen 443
<VirtualHost 172.17.140.25:443>
    ServerName nictool.ops.wyoming.com
    Alias /images/ "/usr/local/nictool/client/htdocs/images/"
    DocumentRoot /usr/local/nictool/client/htdocs
    DirectoryIndex index.cgi
    SSLEngine on
    SSLCertificateFile /etc/ssl/certs/server.crt
    SSLCertificateKeyFile /etc/ssl/private/server.key

    <Files "*.cgi">
       SetHandler perl-script
       PerlResponseHandler ModPerl::Registry
       PerlOptions +ParseHeaders
       Options +ExecCGI
    </Files>

    <Directory "/usr/local/nictool/client/htdocs">
        Require all granted
    </Directory>
 </VirtualHost>

<IfDefine !MODPERL2>
   PerlFreshRestart On
</IfDefine>
PerlTaintCheck Off

Listen 8082

PerlRequire /usr/local/nictool/server/lib/nictoolserver.conf

<VirtualHost 172.17.140.25:8082>
    KeepAlive Off
    <Location />
        SetHandler perl-script
        PerlResponseHandler NicToolServer
    </Location>
    <Location /soap>
        SetHandler perl-script
        PerlResponseHandler Apache::SOAP
        PerlSetVar dispatch_to "/usr/local/nictool/server, NicToolServer::SOAP"
    </Location>
</VirtualHost>

# cat /usr/local/nictool/server/lib/nictoolserver.conf
#!/usr/bin/perl

use Apache::DBI();
use Apache::SOAP;
use DBIx::Simple;
use XML::Parser;
use SOAP::Lite;

use strict;
use NicToolServer;
use NicToolServer::SOAP;
use NicToolServer::Client::SOAP;
use NicToolServer::Client;
use NicToolServer::Session;
use NicToolServer::Response;
use NicToolServer::Permission;
use NicToolServer::Zone;
use NicToolServer::Zone::Sanity;
use NicToolServer::Zone::Record;
use NicToolServer::Zone::Record::Sanity;
use NicToolServer::Group;
use NicToolServer::Group::Sanity;
use NicToolServer::User;
use NicToolServer::User::Sanity;
use NicToolServer::Nameserver;
use NicToolServer::Nameserver::Sanity;

BEGIN {
    # Database configuration
    $NicToolServer::dsn     = "DBI:mysql:database=nictool;host=localhost;port=3306";
    $NicToolServer::db_user = 'nictool';
    $NicToolServer::db_pass = 'nictool';

    # LDAP configuration
    # $NicToolServer::ldap_servers  = 'ldap1.example.com,ldap2.example.com'; # Comma-separated list
    # $NicToolServer::ldap_starttls = 0;                                     # Defaults to 0
    # $NicToolServer::ldap_basedn   = 'ou=Nictool users,dc=example,dc=com';  # Search base
    # $NicToolServer::ldap_user_mapping = 'uid';                             # Defaults to 'uid'

    # If ldap_filter is set, NicTool will perform a subtree search (scope: sub) for user under ldap_basedn,
    # otherwise it will guesstimate the dn at basedn level (ala scope: one)
    # $NicToolServer::ldap_filter = '(&(objectClass=*)(uid=*))';

    # If anonymous search for the user_mapping attribute is not allowed. Only needed if filter is defined
    # $NicToolServer::ldap_binddn = 'cn=Admin,dc=example,dc=com';
    # $NicToolServer::ldap_bindpw = 'the_admin_password';

    Apache::DBI->connect_on_init($NicToolServer::dsn, $NicToolServer::db_user, $NicToolServer::db_pass);
}

1;

# cat /usr/local/nictool/client/lib/nictoolclient.conf
#!/usr/bin/perl
#
# NicTool v2.00-rc1 Copyright 2001 Damon Edwards, Abe Shelton & Greg Schueler
# NicTool v2.01 Copyright 2004 The Network People, Inc.
#
# NicTool is free software; you can redistribute it and/or modify it under
# the terms of the Affero General Public License as published by Affero,
# Inc.; either version 1 of the License, or any later version.
#
# NicTool is distributed in the hope that it will be useful, but WITHOUT
# ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
# or FITNESS FOR A PARTICULAR PURPOSE. See the Affero GPL for details.
#
# You should have received a copy of the Affero General Public License
# along with this program; if not, write to Affero Inc., 521 Third St,
# Suite 225, San Francisco, CA 94107, USA
#

use strict;

use CGI();

BEGIN {
    $NicToolClient::app_dir     = '/usr/local/nictool/client';

    #Interface options
    $NicToolClient::app_title   = 'NicTool';

    $NicToolClient::image_dir   = 'images';

    $NicToolClient::generic_error_message = qq(If you continue to get this error, please contact the system administrator, or your corporate contact.);

    #show the "help" links
    $NicToolClient::show_help_links = 1;

    #go to detail view after creating a new zone
    $NicToolClient::edit_after_new_zone = 1;

    #is the "include subgroups" checkbox automatically checked?
    $NicToolClient::include_subgroups_checked = 1;

    #is the "exact match" checkbox automatically checked?
    $NicToolClient::exact_match_checked = 0;

    $NicToolClient::template_dir                = "$NicToolClient::app_dir/templates";
    $NicToolClient::login_template              = "$NicToolClient::template_dir/login.html";
    $NicToolClient::setup_error_template        = "$NicToolClient::template_dir/setup_error.html";
    $NicToolClient::frameset_template           = "$NicToolClient::template_dir/frameset.html";
    $NicToolClient::start_html_template         = "$NicToolClient::template_dir/start_html.html";
    $NicToolClient::end_html_template           = "$NicToolClient::template_dir/end_html.html";
    $NicToolClient::body_frame_start_template   = "$NicToolClient::template_dir/body_frame_start.html";

    $NicToolClient::page_length = 50;

    #default values for zones/nameservers
    $NicToolClient::default_zone_ttl = '86400';
    $NicToolClient::default_zone_mailaddr = 'hostmaster.ZONE.TLD.';
    $NicToolClient::default_zone_refresh= '16384';    # RFC 1912 range (20 min to 12 hours)
    $NicToolClient::default_zone_retry  = '900';      # RFC 1912 range (180-900 sec)
    $NicToolClient::default_zone_expire = '1048576';  # RFC 1912 range (14 - 28 days)
    $NicToolClient::default_zone_minimum = '2560';    # RFC 2308 range (1 - 3 hours)

    $NicToolClient::default_zone_record_ttl = '86400';
    $NicToolClient::default_nameserver_ttl  = '86400';

    #NicToolServer connection settings
    $NicToolServerAPI::server_host         = "172.17.140.25";
    $NicToolServerAPI::server_port         = "8082";
    $NicToolServerAPI::transfer_protocol   = 'http',
    $NicToolServerAPI::data_protocol       = "soap";   # 'soap' or 'xml_rpc'
    $NicToolServerAPI::debug_soap_setup    = 0;        # debug soap calls
    $NicToolServerAPI::debug_soap_request  = 0;
    $NicToolServerAPI::debug_soap_response = 0;
}

use lib "$NicToolClient::app_dir/lib";
use NicToolClient;

1;

# cat /var/log/httpd/error_log
[Tue Nov 07 12:17:13.162910 2017] [mpm_prefork:notice] [pid 17394] AH00170: caught SIGWINCH, shutting down gracefully
[Tue Nov 07 12:17:14.746765 2017] [core:notice] [pid 17427] SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0
[Tue Nov 07 12:17:14.747925 2017] [suexec:notice] [pid 17427] AH01232: suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Tue Nov 07 12:17:14.748669 2017] [ssl:warn] [pid 17427] AH01906: RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.0.1. Set the 'ServerName' directive globally to suppress this message
[Tue Nov 07 12:17:15.075036 2017] [auth_digest:notice] [pid 17427] AH01757: generating secret for digest authentication ...
[Tue Nov 07 12:17:15.075911 2017] [lbmethod_heartbeat:notice] [pid 17427] AH02282: No slotmem from mod_heartmonitor
[Tue Nov 07 12:17:15.076330 2017] [ssl:warn] [pid 17427] AH01873: Init: Session Cache is not configured [hint: SSLSessionCache]
[Tue Nov 07 12:17:15.076576 2017] [ssl:warn] [pid 17427] AH01906: RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Tue Nov 07 12:17:15.096035 2017] [mpm_prefork:notice] [pid 17427] AH00163: Apache/2.4.6 (CentOS) OpenSSL/1.0.2k-fips mod_perl/2.0.10 Perl/v5.16.3 configured -- resuming normal operations
[Tue Nov 07 12:17:15.096086 2017] [core:notice] [pid 17427] AH00094: Command line: '/usr/sbin/httpd -D FOREGROUND'
[Tue Nov 07 12:20:19.038598 2017] [mpm_prefork:notice] [pid 17427] AH00170: caught SIGWINCH, shutting down gracefully
[Tue Nov 07 12:20:20.558886 2017] [core:notice] [pid 17467] SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0
[Tue Nov 07 12:20:20.560050 2017] [suexec:notice] [pid 17467] AH01232: suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Tue Nov 07 12:20:20.560718 2017] [ssl:warn] [pid 17467] AH01906: RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Tue Nov 07 12:20:20.886125 2017] [auth_digest:notice] [pid 17467] AH01757: generating secret for digest authentication ...
[Tue Nov 07 12:20:20.887004 2017] [lbmethod_heartbeat:notice] [pid 17467] AH02282: No slotmem from mod_heartmonitor
[Tue Nov 07 12:20:20.887425 2017] [ssl:warn] [pid 17467] AH01873: Init: Session Cache is not configured [hint: SSLSessionCache]
[Tue Nov 07 12:20:20.887666 2017] [ssl:warn] [pid 17467] AH01906: RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Tue Nov 07 12:20:20.901210 2017] [mpm_prefork:notice] [pid 17467] AH00163: Apache/2.4.6 (CentOS) OpenSSL/1.0.2k-fips mod_perl/2.0.10 Perl/v5.16.3 configured -- resuming normal operations
[Tue Nov 07 12:20:20.901303 2017] [core:notice] [pid 17467] AH00094: Command line: '/usr/sbin/httpd -D FOREGROUND'
[Tue Nov 07 13:28:30.009134 2017] [mpm_prefork:notice] [pid 17467] AH00170: caught SIGWINCH, shutting down gracefully
[Tue Nov 07 13:28:31.552588 2017] [core:notice] [pid 17697] SELinux policy enabled; httpd running as context system_u:system_r:httpd_t:s0
[Tue Nov 07 13:28:31.553744 2017] [suexec:notice] [pid 17697] AH01232: suEXEC mechanism enabled (wrapper: /usr/sbin/suexec)
[Tue Nov 07 13:28:31.554429 2017] [ssl:warn] [pid 17697] AH01906: RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Tue Nov 07 13:28:31.930069 2017] [auth_digest:notice] [pid 17697] AH01757: generating secret for digest authentication ...
[Tue Nov 07 13:28:31.931097 2017] [lbmethod_heartbeat:notice] [pid 17697] AH02282: No slotmem from mod_heartmonitor
[Tue Nov 07 13:28:31.931508 2017] [ssl:warn] [pid 17697] AH01873: Init: Session Cache is not configured [hint: SSLSessionCache]
[Tue Nov 07 13:28:31.931744 2017] [ssl:warn] [pid 17697] AH01906: RSA server certificate is a CA certificate (BasicConstraints: CA == TRUE !?)
[Tue Nov 07 13:28:31.947518 2017] [mpm_prefork:notice] [pid 17697] AH00163: Apache/2.4.6 (CentOS) OpenSSL/1.0.2k-fips mod_perl/2.0.10 Perl/v5.16.3 configured -- resuming normal operations
[Tue Nov 07 13:28:31.947575 2017] [core:notice] [pid 17697] AH00094: Command line: '/usr/sbin/httpd -D FOREGROUND'

#ip address
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN qlen 1
    link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
    inet 127.0.0.1/8 scope host lo
       valid_lft forever preferred_lft forever
2: ens5: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc mq state UP qlen 1000
    link/ether 00:1c:25:98:1d:26 brd ff:ff:ff:ff:ff:ff
    inet 172.17.140.25/24 brd 172.17.140.255 scope global ens5
       valid_lft forever preferred_lft forever
3: enp22s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc pfifo_fast state DOWN qlen 1000
    link/ether 00:04:5a:a9:3c:90 brd ff:ff:ff:ff:ff:ff
4: wlp3s0: <NO-CARRIER,BROADCAST,MULTICAST,UP> mtu 1500 qdisc mq state DOWN qlen 1000
    link/ether 3a:98:73:e8:e3:e3 brd ff:ff:ff:ff:ff:ff

Pages: [1] 2 3 4 ... 10